Brick and Siding Combinations: Colors and Layouts That Work
The brick and siding combinations that look best start with the brick, because it is the one part of the house you are not changing. Read the brick's undertone first (warm red, orange and brown, or cool gray, tan and sandy), then choose siding that either stays in the same color family for a calm look or contrasts on purpose for a bolder one, and finish with trim and a roof color that tie the two together. The most common layouts put brick on the lower story or the front and siding above it, on the gables or on the sides and back. Here is how to pick colors and layouts, what the siding makers themselves suggest, and what to watch where brick meets siding.
Start with the brick, because it stays
Siding, trim and shingles can all be changed. Brick usually is not, so every other color should be chosen against it. Look at the brick in daylight from the street, not up close, and decide which way it leans:
- Warm brick: classic red, orange, rust and most browns.
- Cool or muted brick: gray, charcoal, tan, cream and faded sandy tones.
- Mixed brick: a blend of several colors. Pick out the color you see most from the street and work from that one.
CertainTeed's ColorCoach explains why this matters: every color has a main color you see first and an undertone underneath it, and when the undertone of one material clashes with the undertone of another, the house looks unbalanced. Its example is a gray siding with blue undertones, which reads bold beside an orange-toned accent and calm beside brown tones. The mortar counts too. Light mortar makes the brick read lighter from the street, and dark mortar makes it read darker.
Color combinations that work
James Hardie, which makes fiber cement siding, published specific pairings in its January 2024 guide to siding and brick combinations. The color names below are Hardie's own; other makers have similar shades under different names.
| Brick | Siding direction | Example the maker gives |
|---|---|---|
| Red brick | A warm neutral for a classic look | Hardie Cobble Stone |
| Red brick | A bolder blue, also a classic look | Hardie Deep Ocean |
| Brown brick | A light blue, or a darker gray | Hardie Boothbay Blue or Iron Gray |
| Brown stone | One color family (monochromatic) | Hardie Timber Bark |
| Blue-gray stone | A neighboring color for soft contrast | Hardie Mountain Sage |
| Faded sandy brick | A very dark siding for high contrast | A dark greenish black, in a 2025 Hardie case study |
That last example is a designer's own house featured on the James Hardie blog in May 2025: sandy brick kept as it was, every mismatched older siding replaced with one vertical V-groove product, and the siding and window frames painted the same dark color. It shows that a light brick does not have to mean a light house.
A simple way to think about it:
- Same family (calm): siding a few shades lighter or darker than the brick, in the same warm or cool direction. Tan siding with brown brick is the classic example.
- Neighboring colors (soft contrast): a color next to the brick's on the color wheel, such as a sage green with gray-blue stone.
- Opposite colors (bold): blue with red or orange brick. CertainTeed notes that complementary schemes give the most contrast, so they work best when one color clearly leads.
Where the siding goes
Most brick homes already have siding somewhere: on gables, dormers, a second story, or the sides and back. James Hardie describes the common layouts like this:
- Brick on the lower story, siding above. On a Colonial-style house, Hardie shows brick on the base with shingle-style siding on the rest of the wall.
- Board and batten above the brick, shingles in the gables. Three textures that still read as one house.
- Stone or brick up to the windowsill, with lap or vertical siding above it.
- Brick as an accent, on a front wall, columns or a chimney, with siding on the rest.
Hardie's advice is to use moderation so the house does not look busy: one striking accent in an otherwise simple design, or a subtle change in texture. If you are weighing board and batten against lap siding for the upper walls, see vertical vs horizontal siding.
Trim and roof: the colors that tie it together
CertainTeed's ColorCoach suggests a palette of three or four colors and the 60-30-10 rule: about 60 percent main color, 30 percent second color and 10 percent accent. On a brick house, the brick and siding usually take the first two roles and trim is the 10 percent.
- White trim is the traditional choice and, CertainTeed says, works with any siding. It also brightens red brick.
- Dark trim frames the house and outlines its details. With darker trim, CertainTeed says a roof that matches the trim or is one shade lighter looks anchored.
- Trim close to the siding color gives a quieter look. Keep high-contrast trim balanced around the whole house rather than heavy on one side.
The roof is the largest single color on most houses, so choose shingles with the brick and siding together, not separately. Our guides to Atlas shingle colors and choosing a shingle color walk through that step.
Matching the siding material to the brick
James Hardie recommends pairing brick with a similarly durable material such as fiber cement rather than a lower-cost material such as vinyl, so the two look like equals. That is a fiber cement maker's view, and vinyl is common on the gables and upper walls of brick homes. The real questions are budget, the look you want up close, and how the siding handles hail and sun on your walls. Our fiber cement vs vinyl siding comparison covers the differences. Patriot Roofing and Restoration installs all types of siding, so your Specialist can show you each option against your own brick.
Where brick meets siding
The line where siding sits above or beside brick is a place where water can get in if it is not finished properly. Rain runs down the siding, so the joint needs the right flashing and trim, installed to the siding maker's instructions, to send that water out over the brick instead of behind it. When we replace siding, we take the old siding off rather than covering it, so the wall can be checked. Any soft sheathing or rot is shown to you and priced in writing before it is repaired.
A quick checklist before you choose
- Look at the brick from the street in daylight and decide if it reads warm, cool or mixed.
- Pick the siding color against the brick, then the trim, then the roof.
- Hold real samples against the brick. Colors on a screen or a small chip rarely look the same on a whole wall.
- Decide where each material goes: lower story, gables, accents, sides and back.
- Check your HOA rules. Some neighborhoods set siding styles or colors.
- Ask how the joint between brick and siding will be flashed and trimmed.
How we help you choose and install
Your Specialist measures every wall, brings samples to hold against your brick, and gives you a written price for the siding, trim, and any soffit and fascia that need replacing. New siding, soffit and fascia carry a 5-year Patriot Built Right Guarantee, and siding repairs carry a 365-Day Patriot Built Right Guarantee. That is our workmanship guarantee, separate from the maker's product warranty. If your roof or gutters are also due, they can be done on the same schedule so the whole exterior comes together at once. See our siding services or siding replacement page for more.
Frequently asked questions
What color siding goes with red brick?
Warm neutrals such as tan, cream and warm gray are the classic choice. For more contrast, a blue works well; James Hardie names a bolder blue with red brick as a classic look. White or cream trim helps red brick look crisp.
Should siding be lighter or darker than the brick?
Either works. Lighter siding keeps the brick as the main feature and is the more traditional look. Darker siding, even on a light brick house, gives a bold modern look. What matters most is that the undertones agree.
Should the trim match the brick or the siding?
Usually neither exactly. Trim is the accent color, about 10 percent of the house in CertainTeed's 60-30-10 rule. White trim works with almost any brick, and dark trim frames the house. Pick the trim after the brick and siding are settled.
Can I put vinyl siding on a brick house?
Yes. Many brick homes have vinyl on the gables, dormers or upper walls. Fiber cement and engineered wood are other options with a heavier look up close. Your Specialist can show each one next to your brick and price them in writing.
Does Patriot install siding on brick homes?
Yes. We install and repair all types of siding, including the siding sections on brick homes, and we can replace soffit and fascia and the roof at the same time.
Want to see colors against your own brick?
We will measure the house, bring samples to hold against your brick, and put the price in writing. Contact us or call 501.441.2900 to set up a visit.
21-Point Roof Inspection
Your Roofing Specialist checks the roof and attic and gives you a 21-point report with photos of what we find.
Roof Repair Diagnostic Visit
Includes the 21-Point Roof Inspection Report and attic analysis. Patriot Care Club members pay no service fee.